Shuttle AK32A User Manual Download Page 70

Page: 70 / 79

- 68 -

State After Power Failure

This allows you to set whether you want your system to reboot after
power has been interrupted.

The choice: Auto or Off.

IRQ/Event Activity Detect

Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.

VGA

VGA
When this item enabled, you can set VGA to awaken the system.

The choice: OFF or ON.

LPT & COM

LPT & COM
When LPT & COM stays On, any activity from one of the listed
system peripheral devices or IRQs wakes up the system.

The choice: NONE, LPT, COM, or LPT/COM.

HDD & FDD

HDD & FDD
When HDD & FDD stays On, any activity from one of the listed
system peripheral devices wakes up the system.

The choice: OFF or ON.

PCI Master

PCI Master
When PCI Master stays On, any activity from one of the listed sys-
tem peripheral devices wakes up the system.

The choice: OFF, or ON

Power-On by PCI Card

Power-On by PCI Card
This item enables/disables the power on function of PCI Card.

The choice: Disabled or Enabled.

Modem Ring Resume

Modem Ring Resume
When this item enabled, any event occurring Modem Ring/activity of
LAN will awaken a system which has been powered down.

The choice: Disabled or Enabled.

RTC Alarm Resume

RTC Alarm Resume
When this item enabled, your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend
mode.

The choice: Disabled or Enabled.

Summary of Contents for AK32A
















































































Search results

Summary of Contents for AK32A

Reviews:

Related manuals for AK32A

Brands by name

Popular brands

Shuttle AK32A, User Manual

Search results

Summary of Contents for AK32A

Reviews:

Related manuals for AK32A

Brands by name

Popular brands