- 64 -
UART Mode Select
UART Mode Select
UART Mode Select
UART Mode Select
UART Mode Select
This item allows you to select which mode for the Onboard Serial
Port 2.
The choice: IrDA, ASKIR, or Normal.
RxD, TxD Active
RxD, TxD Active
RxD, TxD Active
RxD, TxD Active
RxD, TxD Active
This item specifies the Active level for RxD & TxD signal.
The choice: Hi,Hi, Hi,Lo, Lo,Hi, or Lo,Lo.
IR Transmission Delay
IR Transmission Delay
IR Transmission Delay
IR Transmission Delay
IR Transmission Delay
This item enables/disables the delay of the IR state change from Rx to
Tx mode or Tx to Rx mode.
The choice: Enabled or Disabled.
UR2 Duplex Mode
UR2 Duplex Mode
UR2 Duplex Mode
UR2 Duplex Mode
UR2 Duplex Mode
This item allows you to selects the IR half/full duplex function.
The choice: Full or Half.
Use IR Pins
Use IR Pins
Use IR Pins
Use IR Pins
Use IR Pins
This item allows you to select IR I/O Pins location.
RxD2, TxD2 - Through SINB/SOUTB.
IR-Rx2Tx2 - Through IRRX/IRTX.
The choice: RxD2, TxD2 or IR-Rx2Tx2.
Onboard Parallel Port
Onboard Parallel Port
Onboard Parallel Port
Onboard Parallel Port
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/
O address setting.
The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.
Parallel Port Mode
Parallel Port Mode
Parallel Port Mode
Parallel Port Mode
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port.
Select Normal, Compatible, or SPP unless you are certain your
hardware and software both support one of the other available
modes.
The choice: SPP, EPP, ECP, or ECP+EPP.
EPP Mode Select
EPP Mode Select
EPP Mode Select
EPP Mode Select
EPP Mode Select
This item selects the EPP Mode.
The choice: EPP1.7 or EPP1.9.
