- 38 -
Wake-On-Lan Connector (J2)
Attach a 3-pin connector from the LAN card which supports Wake-On-LAN
(J2) function. This function lets users wake up the connected system through
LAN card.
Pin Assignments:
1=5V-SB
2=GND
3=Wake_Lan/GP2012
IR Connector (J5)
If you have an Infrared device, this mainboard can implement IR transfer
function. To enable the IR transfer function, follow these steps:
Pins Assignment:
1=+5V
2=CIRRX
3=IRRX
4=GND
5=IRTX
Note:
Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Otherwise,
incorrect IR connection may do damage to your IR device.
Step 1.
Attach the 5-pin infrared device cable to J5.
(Refer to the above diagram for IR pin assignment.)
Step 2.
Configure the Infrared transfer mode in field "UART Mode Select"
of "Integrated Peripherals" sub-menu in BIOS setup program. This
mainboard supports IrDA, ASKIR, and Normal transfer modes.
E3
E4
J2 WAKE_ON_LAN
IR
J5
1
3 2 1
5
4
3
2
1
