- 36 -
CPU, AGP and System Fan connectors (FAN1/FAN2/FAN3)
The mainboard provides four onboard 12V cooling fan power connectors to
support CPU(FAN1) , AGP(FAN2) and System(Fan3) cooling fans.
Note:
Both cable wiring and type of plug
may vary,which depends on the
fan maker. Keep in mind that the
red wire should always be con-
nected to the +12V header and
the black wire to the ground
(GND) header.
IR Header (J1)
If you have an Infrared device, this mainboard can implement IR transfer
function. To enable the IR transfer function, follow these steps:
Note: Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Otherwise,
incorrect IR connection may do damage to your IR device.
Step 1.
Attach the 6-pin infrared device cable to J1.
(Refer to the above diagram for IR pin assignment.)
Step 2.
This mainboard support IrDA, or Normal transfer modes.
E2
E3
Pins Assignment:
1=NC
2=KEY
3=+5V 4=GND
5=IRTX 6=IRRX
1
3
5
2
4
6
+12V
FAN01
FAN02
FAN03
GND
FAN1
1
1
FAN3
FAN2
1
1
J1
IR
