- 57 -
Power Management
This item acts like a master switch for the power-saving modes and hard
disk timeouts. If this item is set to Max Saving, power-saving modes
occur after a short timeout. If it is set to Min Saving, power-saving
modes occur after a longer timeout. If it is set to User Define, you can
insert your own timeouts for the power-saving modes.
Ø
The choice: Min Saving, Max Saving, or User Define.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
The item only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS.
Video Off In Suspend
This item determines the manner in which the monitor is blanked.
Ø
The choice: Yes or No.
Suspend Type
This item allows you to select the Suspend Type.
Ø
The choice: Stop Grant or PwrOn Suspend.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Suspend Mode
The CPU clock will be stopped and the video signal will be suspended
if no Power Management events occur for a specified length of time.
Full power function will return when a Power Management event is
detected.
Ø
The choice: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min,
30 Min, 40 Min, or 1 Hour.
HDD Power Down
When this item is enabled and after the setup time of system inactivity,
the hard disk drive will be powered down while all other devices
remain active.
Ø
The choice: Disabled or 1 Min~15 Min.
HDD Off When Suspend
Enable this item to leave the hard disk drive powered down in the
system suspended mode.
Ø
The choice: Enabled or Disabled.
