- 47 -
routine. You can use this item to select which situation you want the
BIOS to stop the POST process and notify you.
Ø
The choice: All Errors, No Errors, All, But Keyboard, All, But Diskette,
or All, But Disk/Key.
Base Memory/Extended Memory/Total Memory
These items are automatically detected by the system at start up time.
These are display-only fields. You can't make change to these fields.
******************************************************
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub-menu
to configure each hard disk drive.
IDE HDD Auto-Detection
Press <Enter> to auto-detect HDD on this channel. If detection is
successful, it fills the remaining fields on this menu.
IDE Primary Master
Selecting 'Manual' lets you set the remaining fields on this screen and
select the type of fixed disk.
Ø
The choice: None, Auto, or Manual.
Access Mode
Choose the access mode for this hard disk.
Ø
The choice: CHS, LBA, Large, or Auto.
Capacity
Disk drive capacity (Approximated). Note that this size is usually slightly
greater than the size of a formatted disk given by a disk checking pro-
gram.
The following options are selectable only if the 'IDE Primary Master'
item is set to 'Manual', and the 'Access Mode' item is set to 'CHS'.
Cylinder
Set the number of cylinders for this hard disk.
Ø
Min = 0, Max = 65535
Head
Set the number of read/write heads.
Ø
Min = 0, Max = 255
Precomp
Warning: Setting a value of 65535 means no hard disk.
Ø
Min = 0,
Max = 65535
Landing Zone
Set the Landing Zone size.
Ø
Min = 0, Max = 65535
Sector
Number of sector per track.
Ø
Min = 0, Max =255
******************************************************
