![background image](http://html.mh-extra.com/html/shure/ulxd6/ulxd6_user-manual_1262491021.webp)
9/20/17, 11)49 AM
Shure Publications | User Guides | ULXD6 ULXD8
Page 21 of 31
http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
3. IR Sync the transmitter and receiver to clear the
encryption key.
Note: If multiple transmitters are encrypted to a single receiver,
each transmitter must be IR synced to clear the encryption key.
BN and GN OFFSET
BN
OFFSET and GN
OFFSET compensate for signal level
differences between transmitters that share the same
receiver channel. For normal gain adjustments, use the
receiver gain buttons.
Set the offset gain on a low signal level transmitter to
match a louder transmitter: IR
PRESETS > GOOSENECK
/
BOUNDARY > BN
OFFSET
IR
PRESETS > GOOSENECK
/
BOUNDARY > GN
OFFSET
Transmitter Reset
Hold mute button while powering on transmitter to
restore factory settings:
Mute button: Toggle
Mute LED: Active/Mute = Green/Red
Mute LED with MX400R gooseneck: Active/Mute =
Red/Off
Initial state from charger: Active
High-pass filter: Off
RF power: 10 mW
Battery type: Alkaline
BN or GN offset: 0 dB
Power lock: Off
Mute LED brightness: Normal
Frequency Range