![background image](http://html.mh-extra.com/html/shure/ulxd6/ulxd6_user-manual_1262491020.webp)
9/20/17, 11)49 AM
Shure Publications | User Guides | ULXD6 ULXD8
Page 20 of 31
http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Off: Power is off
Menu path: IR
PRESETS > GOOSENECK
/
BOUNDARY >
INITIAL
STATE
FROM
CHARGER
Note: If Mute
Button
Behavior is set to Push-to-Talk and Initial
State
From
Charger is set to Active, the transmitter will only pass
audio when you push the mute button. Make sure to coordinate
settings for Mute
Button
Behavior and Initial
State
From
Charger.
Audio Signal Encryption
When encryption is enabled, the receiver generates a
unique encryption key which is shared with the transmitter
during an IR sync. Transmitters and receivers that share an
encryption key form a protected audio path, preventing
unauthorized access from other receivers.
Enable encryption using Wireless Workbench or the
receiver front panel. For more details, see the user guide
for your receiver.
Encrypting a Single Transmitter to a
Single Receiver
1. From the receiver menu: DEVICE
UTILITIES >
ENCRYPTION >
ON
(Auto)
2. Press ENTER.
3. Perform an IR Sync to share the encryption key with
the selected transmitter.
Removing Encryption
1. From the receiver menu: DEVICE
UTILITIES >
ENCRYPTION > OFF
2. Press ENTER.