Shure UC2, Service Manual

Page: 29 / 34

Shure UC2 Hand-Held UHF Transmitter
Replacement Parts and Drawings 29 25A1044 (RI)
Replacement Parts and Drawings
Parts Designations
The following comments apply to the parts list and the schematic:
Resistors: Unless otherwise noted, all resistors are surface-mount
0603 size, with
1
/
10
W
rating and 1% tolerance.
Capacitors: Unless otherwise noted, non-polarized capacitors are
surface-mount
NPO
dielectric types with a 100
V
capacity and a 5%
tolerance, and polarized capacitors are tantalum types.
Table 3
UC2 Model Frequency Variations
Printed Circuit Boards
(in order by frequency)
Country
Code
Country
Designation
Frequency
Range
UC2 Printed
Circuit Board #
MC Netherlands 774 – 782 MHz 90MC8792J
UA U.S.A. and Canada 782 – 806 MHz 90UA8792J
JA Japan 797 – 806 MHz 90JA8792J
MB Europe 800 – 830 MHz 90MB8792J
JB Japan 806 – 810 MHz 90JB8792J
KK United Kingdom 838 – 862 MHz 90KK8792J
Table 4
Replacement Parts
Reference
Designation Description
Shure Part
Number
MP1 Actuator 65B8298
MP2 Battery snap (positive) 56A317
MP3 Battery snap (negative) 56A318
MP4 Bezel 65A8299
MP5 Compression disc (in battery cup) 38A180
MP6 Contact (on contact pcb) 53D2039
MP7 Cup 65A8300A
MP8 Handle 65A8301A
MP9 Interconnect strip 56D8074
MP9 Nameplate, bottom 39–8302
MP10 Nameplate, handle 39–8303