General
The Shure UA505-RSMA Remote Antenna Mounting Bracket Kit lets you
mount an antenna away from the receiver or equipment rack.
NOTE:
Antennas and bracket mounting hardware (screws, washers and
nuts) are not included in this kit.
Wall bracket dimensions: 84.52 x 63.5 x 77.02 mm (H x W x D)
Included Components
95A32436
Reverse SMA Bulkhead Adapters, lockwasher, nut (1)
UA505-RSMA
Remote Antenna Mounting Bracket Kit (1)
95F31216
6" Reverse SMA Cable
Remote Antenna Placement
Follow these guidelines when mounting antennas remotely:
•
Reduce distance between transmitter and antenna.
•
Mount antennas farther from each other to improve performance.
•
Position antennas so there is nothing obstructing the line of sight to the
transmitter, including the audience.
•
Keep antennas away from metal objects and any other antennas.
•
Use only low-loss reverse SMA cable to avoid poor RF signal.
⁃
Consult cable's specifications and calculate signal loss for desired
cable run.
•
Use one continuous length of cable from the antenna to the receiver to
increase signal reliability.
•
Always perform a walk-around test to verify coverage before using a
wireless system during a speech or performance. Experiment with anten-
na placement to find the optimum location. If necessary, mark any trouble
spots and ask presenters or performers to avoid those areas.
Mounting the Bracket
Avoid mounting antennas near Wi-fi access points or other 2.4 GHz devices when possible.
Wall Mount
1/2
©2016 Shure Incorporated
UA505-RSMA
Remote Antenna Mounting Bracket Kit
