Shure Incorporated
9/25
SECURING MIXER TO TOP MOUNTING SURFACE
Hanging Mount
Note:
The hardware provided is for attachment to wood. Other surfaces require the use of appropriate hardware
rated for 15 lbs. or more.
1. Fasten the straddle brackets to the top of the mixer.
INSTALLING STRADDLE BRACKETS FOR HANG MOUNTING
2. Fasten the straddle brackets to the bottom of the mounting surface, using the four (4) supplied wood screws.
SECURING MIXER TO BOTTOM MOUNTING SURFACE
SCM410 Connections
1. Connect microphone signal sources to the Channel Input connectors. Use conventional 2-conductor shielded
audio cables.
2. If any condenser microphones are connected, set the +12V phantom power DIP switch to ON.
3. Connect the SCM410 Mic/Line Level Output to the input of mixers, EQs, amplifiers, or recorders.
4. Connect the power cord to 100-120 Vac (SCM410) or 220-240 Vac (SCM410E)
