Shure SBC840M, User Manual

Page: 8 / 15

Shure Incorporated
8/15
1.
2.
3.
Charging
To charge, place batteries into the charging bays with the battery contacts facing down. The LEDs illuminate to indicate battery
status.
LED Indicators
Color State
Charge status LED red Charging
Charge status LED green Charging complete
Error LED amber flashing
Charging stopped. To resume charging, try these solutions:
Check that the battery contacts are clean and undamaged. If con­
tacts are dirty or damaged, the charger might not detect the batter­
ies.
Check the temperature. If the battery temperature is above 60°C or
below 0°C, the error LED flashes.
Contact Shure service. Battery may be discharged beyond recovery
or have internal problems. Replace battery.
Charge status LED red
Error LED amber flashing
Battery too warm. Charging stops at 80% of full capacity. Allow battery to
cool below 45°C to resume charging to full capacity.
Charge status LED green
Error LED amber flashing
Charging complete, but battery temperature is too warm or cold (over 60°C
or below 0°C).
Power LED red
Charger is in storage mode. Batteries are charging or discharging to stor­
age voltage.
Power LED red
Charge status LED amber
Batteries are ready for storage.