11
Monitoring While Recording
The headphone jack provides direct monitoring of the microphone signal while
recording, without any of the delay that occurs if you were to monitor this signal
through the computer’s headphone output.
Warning:
Turn the VOLUME control down before plugging in headphones
You can also monitor previously recorded tracks while recording a new track.
Adjust the MONITOR thumb slider to balance levels from pre-recorded and live
audio.
Note:
Be sure to turn off monitoring in your software for the track to which you
are recording.
Pad Switch
The pad switch helps prevent distortion from extremely loud sources,
such as when close-miking horns or drums.
Gain Adjustment
For maximum audio quality, set the MIC GAIN as high as possible. The peak level
indicator should remain a steady green while recording, flickering yellow at the
highest sound volumes.
Lower the MIC GAIN if the peak level indicator shows red at any time during a
performance.
