![background image](http://html1.mh-extra.com/html/shure/performance-gear-pg-wireless/performance-gear-pg-wireless_quick-start-manual_1262381005.webp)
5
Startup
Follow these simple steps to check for interference and to set your receiver and trans-
mitter to the same channel.
mute
channel
ready
audio
Internal Diver
audio
ready
channel
Diversity Antenna System
PG4
channel
select
3 s
9V
channel
mute
channel
ready
audio
Internal Antenna Diversity
channel
mute
channel
ready
2. Plug in the power supply.
The channel display should illuminate.
There is no power switch.
3. Press and hold down the channel button
until the display begins flashing.
If you see the
Busy Indicator
(a flashing
dash) change the channel.
4. Wait for the channel display to stop
flashing.
5. If you haven’t installed the battery, do it now
and leave the cover off.
6. Turn
ON
the handheld or bodypack transmitter
by pressing the power button.
The channel display should illuminate.
It turns off after ten seconds to conserve
battery.
7. Check to see that the transmitter and the receiver dis-
play the same channel.
The ready LED on the receiver should be illuminated.
8. Replace battery cover.
1. Turn
OFF
the microphone or bodypack.
If left on, it will create a false busy indicator.
Summary of Contents for Performance Gear PG Wireless
