background image

ENGLISH

3

WARNING!

USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE.

USE AS LOW A VOLUME AS POSSIBLE.

In order to use this system safely, avoid prolonged listening at excessive sound pressure levels.  Please use the fol-

lowing guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure

to sound pressure levels before hearing damage occurs.

90 dB SPL at 8 hours

95 dB SPL at 4 hours

100 dB SPL at 2 hours

105 dB SPL at 1 hour

110 dB SPL  at 

1

/

2

 hour

115 dB SPL at 15 minutes

120 dB SPL — avoid or damage may occur

It is difficult to measure the exact Sound Pressure Levels (SPL) present at the eardrum in live applications.  In addi-

tion to the volume setting on the PSM, the SPL in the ear is affected by ambient sound from floor wedges or other

devices.  The isolation provided by the fit of quality earphones is also an important factor in determining the SPL in

the ear.
Here are some general tips to follow in the use of this product to protect your ears from damage:

1. Turn up the volume control only far enough to hear properly.
2. Ringing in the ears may indicate that the gain levels are too high.  Try lowering the gain levels.
3. Have your ears checked by an audiologist on a regular basis.  If you experience wax buildup in your ears,

stop using the system until an audiologist has examined your ears.

4. Wipe the earphones with an antiseptic before and after use to avoid infections. Stop using the earphones if

they are causing great discomfort or infection.

This symbol indicates that there are important operating and maintenance instructions in the

literature accompanying this unit.

Summary of Contents for P4M









Reviews: