ENGLISH
8
Specifications
Measurement Conditions (unless otherwise specified):
full gain; 1 kHz, one channel activated;
source impedances: Mic 150
Ω
, Aux Level 150
Ω
; termina-
tions: Line 600
Ω
.
Frequency Response
(Ref 1 kHz, controls centered)
20 Hz to 20 kHz
±
2 dB
INPUT Specifications
Input
1–4 (front panel)
Aux In
Gain (Maximum)
43 dB
0 dB
Impedance (at 1kHz)
5800
Ω
18 k
Ω
(each)
9100
Ω
(1/L mono)
Input Clipping Level
+12dBV
+12 dBV
Crosstalk
-100 dB
-90 dB
Common Mode Rejection
> 75 dB
> 70 dB
OUTPUT Specifications
Output
Split 1–4
Mix Out
Impedance
N/A
500
Ω
(unbalanced)
1k
Ω
(balanced)
Output Clipping Level
N/A
+5 dBV (10 k
Ω
balanced
load, -30 dBV input ch. 1–4.)
Noise (100 Hz to 22 kHz)
-110 dBV
-100 dBV (all controls CCW)
-62 dBV (all controls CW)
Distortion (THD) at 1kHz)
.0005%
< .05% (0 dBV output)
Crosstalk
-100 dB
-70 dB
LEDs: Resultant Mix Out Level
Green: -30 dBV
Yellow: -10 dBV
Red: 0 dBV
Current
120 mA max.
Power Requirements
Operating voltage 14–18 Vdc
Supplied with one of the following external power supplies:
S
Model PS40: 120 Vac, 60 Hz input
S
Model PS40E, Model PS40UK: 230 Vac, 50/60 Hz input
NOTE: Courtesy DC connector is protected from short by a self–resetting
“Polyfuse”. Maximum recommended load is 250mA. (2 P4Ms or 1 P4T.)
Phantom Power
The P4M does not produce phantom power, but phantom power is allowed
to pass through Split Outputs 1–4 to inputs1–4 respectively.
Audio Polarity
All outputs in polarity with all inputs.
XLR Pin 2 is “hot” with respect to Pin 3; Pin 1 is ground.
1/4” TRS tip is “hot” with respect to ring; sleeve is ground.
Temperature Range
Operating
-7
°
to 49
°
C (20
°
to 120
°
F)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage
-29
°
to 74
°
C (-20
°
to 165
°
F)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Dimensions
44 mm H x 218 mm W x 162 mm D
(1.72 x 8.60 x 6.37 inches)
Net Weight
1.20 Kg (2 lbs, 10 oz)
Certification
P4M:
Eligible to bear CE marking:
. Conforms to European Union EMC
directive 89/336/EEC. Meets applicable tests and performance criteria in
European Standard EN 55103 (1996) parts 1 and 2, for residential (E1)
and light industirial (E2) environments.
PS40:
Conforms to applicable U.S. and Canadian electrical and safety
standards.
PS40E/PS40UK:
Conforms to European low voltage directive 72/23/EEC. Eli-
gible to bear CE marking.
Furnished Accessories
Single Mount Rack Bracket
53A8484
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual Mount Rack Bracket
53B8484
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straddle Bars
53A8443
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC Adaptor
PS40 (120V), PS40E (230V), PS40UK (230V)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC Jumper Cable
95A8420
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
