Shure Incorporated
15/24
•
1.
2.
3.
4.
Routing Signals from Loudspeaker to Loudspeaker
Use this method when:
Signal comes from device with Ultimo chip transmitting in unicast, such as Shure ANI
Learn more about Dante flows in our FAQs
.
If you encounter unicast Dante flow limits, route from one loudspeaker to another using the Dante output channel.
In Designer, put all of the loudspeakers and other devices you want to route to in the same location.
Route the signal to the first loudspeaker.
Open the first loudspeaker's configuration window in Designer.
Choose Pre-DSP in the
Dante output signal
menu. This prevents DSP blocks from stacking on top of each other in the
signal chain.
