Shure Incorporated
14/24
•
•
Routing Signals to Multiple Loudspeakers
In rooms with multiple loudspeakers installed, you can route a signal from one loudspeaker to another using the Dante output
channel, or you can route the signal to each loudspeaker individually.
Routing to Each Loudspeaker Individually
Use this method when:
Signal comes from device with Brooklyn II chip, such as a P300
or
Signal comes from device with Ultimo chip transmitting in multicast
Learn more about Dante flows in our FAQs
.
If you're using a Shure P300 or other devices with high unicast Dante flow limits, route a signal to each loudspeaker individual
ly using Designer or Dante Controller.
