![background image](http://html1.mh-extra.com/html/shure/glx-d/glx-d_user-manual_1262349006.webp)
6
Batteries and Charging
LED Status During Charging
The following LED states indicate battery status when the transmitter is connected to
a charger:
• Green = charging complete
• Green Flashing = battery charge > 90%
• Red = battery charging
• Amber Flashing = battery error, replace battery
GLX-D transmitters are powered by Shure SB902 lithium-ion rechargeable batteries. Advanced battery chemistry maximizes runtimes with zero memory effects, eliminating
the need to discharge batteries prior to charging.
When not in use, recommended battery storage temperature is 10°C (50°F) to 25°C (77°F).
Note:
The transmitter will not pass RF or audio signals when connected to the charging cable.
The following battery charging options are available:
link
mode
auto
audio
rf
channel
group
① ② ③ ④ ⑤ ⑥ ⑦
Charging from a USB Port
Charging from an AC Power Source
1. Plug the charging cable into the
charging port on the transmitter.
2. Plug the charging cable into
an AC power source.
1. Plug the USB charg-
ing cable into the charging
port on the transmitter.
2. Plug the cable into a
standard USB port.
Charging Times and Transmitter
Runtimes
Use the following table to determine approximate battery runtime based on the dura-
tion of charging time. Times shown are in hours and minutes.
Note:
Batteries charge faster when using an AC powered charger versus a USB
connection.
AC Power Source
Charging
USB Connection
Charging
Transmitter Runtime
0:15
0:30
up to 1:30
0:30
1:00
up to 3:00
1:00
2:00
up to 6:00
3:00
4:00
up to 16:00*
*Storage time or excessive heat will reduce maximum runtime.
Note:
GLX-D transmitters automatically power-off after approximately 1 hour to con-
serve battery life if the signal from a linked receiver is not detected.
Installing Transmitter Batteries
Bodypack Transmitter
1. Move the locking lever to the
open
position and slide the battery door open.
2. Place the battery into the transmitter.
3. Close the battery door and slide door to engage the latch.
Important Tips for Care and Storage of
Shure Rechargeable Batteries
Proper care and storage of Shure batteries results in reliable performance and en-
sures a long lifetime.
• Always store batteries and transmitters at room temperature
• Ideally, batteries should be charged to approximately 40% of capacity for long-
term storage
• During storage, check batteries every 6 months and recharge to 40% of capacity
as needed
Transmitter Battery Meter
The number of segments illuminated on the meter indicates the remaining battery life
for a linked transmitter:
① = > 30 min
② = > 2 hours
③ = > 4 hours
④ = > 6 hours
⑤ = > 8 hours
⑥ = > 10 hours
⑦ = > 12 hours
Note:
The LEDs will cycle on/
off while battery life is being
calculated.
Summary of Contents for GLX-D
Page 41: ...41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 70dB A 18 I 19 20 21 60 C 140 F Shure EMC EMC...
Page 44: ...44 TA4M 4 TA4F Micro USB 5 ID Shure 1 1 2 3 2 3 4 5 6 5 6 7 7 8 off on GLXD2 on 3 1 30 ID...
Page 51: ...51 RF RF rf Wi Fi OL 2 0 Shure Update Utility LK ID 3 1 GLX D 1 link RE...
Page 67: ......