Shure GLX-D, User Manual

Page: 10 / 68

10
L....i....v....e M....u....t....e
N..e..e..d..l..e
S..t..r..o..b..e
rf channel
group
auto
link
mode
M...e...n...u
Tuner Menu
Enter tuner mode by pressing the footswitch.
In tuner mode, the controls will only affect tuner functions, RF and audio settings are not affected.
Note: The audio signal does not pass through the tuner, eliminating the need for bypass switches commonly found on wired tuners.
Tuner Options
• Indicator:
Needle
or
Strobe
• Output: Live , Mute , or Both
• Display Brightness
• Detune
• Sharps and Flats
• Reference Pitch
Indicator: Needle or Strobe
The tuner indicator can be set to display a needle style or strobe style.
Needle
A single LED will illuminate on the
tuning bar to indicate sharp or flat.
The green center LED will illuminate
when the note is in tune.
Strobe
A sequence of three LEDs will travel across
the tuning bar in the direction of sharp or
flat. The LEDs will remain stationary when
the note is in tune.
Note: Indicator and Output settings are displayed in a scroll from left to right.
Choosing Live or Mute Audio Output
The following modes are available to set the audio output to
Live
or
Mute
when the
footswitch is pressed in tuner mode.
Note: Text for the output settings are displayed in a scroll from left to right.
Mode Footswitch Function
Live
Receiver Display (audio
Live
) ↔ Tuner
Display (audio Live )
Mute
Receiver Display (audio
Live
) ↔ Tuner
Display (audio
Mute
)
Both
Tuner Display (audio
Mute
) ↔ Tuner
Display (audio
Live
)*
*Note: In
Both
mode, the pedal powers up in Receiver Display. Press the footswitch
to enter tuner mode.
Selecting and Editing Tuner Menu
Settings
Use the following buttons to select and edit the tuner menu
settings:
• Use the
mode
button access the menu and to scroll be-
tween menu settings
• Use the Use ▲ ▼ buttons to change a menu parameter
• Use the footswitch to enter and save parameter changes
Display Brightness
The receiver has a built-in light sensor to automatically adjust the display brightness.
To manually adjust the brightness choose one of the following settings:
*A = automatic *1 = low *2 = medium *3 = high
Detune
The tuner can be set to display standard tuning for instruments that have been de-
tuned up sharp or flat in the following increments:
• Up to 5 steps sharp (
#1
-
#2
-
#3
-
#4
-
#5
)
• Up to 6 steps flat ( b6 - b5 - b4 - b3 - b2 - b1 )
The notation for standard tuning is
b0
b0
= Standard Tuning
Example of note displayed in Detune
mode
* dot appears on the display as a reminder that the pedal is detuned.
Sharps and Flats
Adds sharp or flat symbols to the display of non-natural notes.
Sharps and Flats Flats only Sharps only
Reference Pitch
The reference pitch can be offset from standard A440 in a range of 432 Hz to 447 Hz
in 1 Hz increments.
When adjusting the pitch, the last 2 digits of the value will be displayed. For example,
"32" would appear on the display when the pitch has been set to 432 Hz.
A dot appears on the display as a reminder that the reference pitch has been offset.
A440 447 Hz 432 Hz