background image

USER GUIDE FOR THE SHURE FP16A

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

GUIDE DE L’UTILSATEUR DE SHURE LA FP16A

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

BEDIENUNGSANLEITUNG FÜR SHURE FP16A 

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

GENERAL DESCRIPTION

The FP16A is a 1-input, 6-output, compact,
self-contained audio distribution amplifier for routing
multiple audio signal feeds without incurring loss,
distortion, hum or noise. The intelligent design, reliable
components and meticulous construction of the FP16A
make it the optimum choice for broadcast stations—AM,
FM, or TV, studios or ENG vans—as well as recording
studios, duplicating houses, and telecommunications and
production facilities.

FEATURES

S

Wide–range audio frequency response

S

Up to 90 dB gain

S

Low noise, hum and distortion

S

Protected against damage from input overload
and shorted outputs; protected against RFI and
mechanically protected against incorrect battery
insertion

S

Transformer-coupled XLR input connector is
switchable to low-impedance microphone or line
level

S

Phantom power for condenser microphones
available at input

S

Six isolated, transformer-coupled XLR outputs
are switchable to low-impedance balanced mi-
crophone or 600-ohm balanced line level

S

Link input and output jacks permit ”ganging” of
FP16s for additional outputs, or adding external
equipment such as equalizers, compressors or
limiters

S

Recessed input gain control with normal and
overload LED indicators

S

Recessed individual output channel gain controls

S

Powered by AC (120 or 240V—internally select-
able) or built-in battery pack

S

Low battery drain provides more than 15 hours
operation under normal operating conditions

S

Noiseless and automatic switchover to and from
battery power

S

Rugged and durable construction

S

Compact and lightweight for field use and trans-
portation

S

Reliable operation over wide temperature and
humidity extremes

S

Rack-mountable with accessory rack mount kit
Noise

Model FP16A Distribution Amplifier

User Guide

27A8725 (BA)

E

2002, Shure Incorporated

Printed in U.S.A.

Summary of Contents for FP16A













Reviews: