![background image](http://html.mh-extra.com/html/shure/fp16a/fp16a_user-manual_1261070004.webp)
4
1.
Locate the Power board.
2.
Remove the jumper plug from connector J205
(marked 120V), and carefully insert it in connector
J206 (marked 240V), making sure all six pins are
properly engaged.
3.
lnsert the T50mA/250V fuse (packaged with the
FP16A) in the fuseholder marked F202.
4.
Replace the AC line cord (if necessary) with one de-
signed for the 240 volt source. If the FP16A is to be
used outside the U.S. and Canada, local regulations
may require replacing the line cord with one having
wire insulation colors as follows:
“live” or “hot”
Neutral
Earth or Ground
U.S., Canada
Black
White
Green
Europe
Brown
Blue
Green/Yellow
5.
Mark the FP16A rear panel with the new operating
voltage.
REPLACEMENT PARTS LIST
REFERENCE DESIGNATION
DESCRIPTION
SHURE PART (COMMERCIAL ALTERNATIVE)
C101
Capacitor, Electrolytic, 47
µ
, 35V
Shure 60101FT (Sprague 503D476F035ND)
C104, C107, C130
Capacitor, Electrolytic, 22
µ
F, 35V
Shure 60104FT (Sprague 502D226G050CE1C)
C105, C108, C111,
Capacitor, Electrolytic, 4.7
µ
F, 35V
Shure 60105FT (Panasonic ECE-A35Z4R7)
C114, C117, C120
C123
C110, C113, C116,
Capacitor, Electrolytic, 100
µ
F, 35V
Shure 60107FT (Sprague 503D107F050PD
C119, C122, C125,
C127, C133
C131, C134
Capacitor, Electrolytic, 470
µ
F, 35V
Shure 60108FT (Sprague 503D477M035PE)
C202
Capacitor, Electrolytic, 330
µ
F, 63V
Shure 60111FT (Sprague 503D337F063QG)
C204, C205
Capacitor, Electrolytic, 10
µ
F, 35V
Shure 60112FT (Sprague 503D106F035LA)
D101-D108
Diode, Computer, 75V
Shure 86A415 (TI/GE 1N4148)
D201-D204, D206-D207
Silicon Rectifier, 100V, 1/2A
Shure 60201FT (Motorola 1N4002)
D205
Zener Diode, 9V, 112W
Shure 60202FT (Motorola1N5239)
D601
Light-Emitting Diode, Green
Shure 60204FT (Rohm SLR34MG3)
D701
Light-Emitting Diode, Yellow
Shure 60205FT (Rohm SLR34YY3)
D702
Light-Emitting Diode, Red
Shure 60206FT (Rohm SLR340R3)
F201
Fuse, Slow-Blow, 3AG, 100 mA, 250V
Shure 60207FT (Littelfuse 313.010)
F202
Fuse, Time Delay, 5 mm x 20 mm,
Shure 60208FT (Littelfuse 218.050)
50 mA, 250V
J401
Connector, 8-socket, XLR, PCB-mount
Shure 60216FT (Cannon XLB-3-31PCV)
J402-J407
Connector, 3-pin, XLR, PCB-mount
Shure 60217FT (Cannon XLB-3-32PCV)
J501-J502
Connector, PhoneJack, 2-conductor,
Shure 60218FT
Single Closed Circuit
L401-L414,
Ferrite Bead Ring
L501-L502
Q101, 0103, Q105,
Transistor, NPN
Shure 60601FT (Rohm T1S92)
Q107, 0109, Q111,
Q113-Q115, 0202-Q203
Q102, Q104, 0106,
Transistor, PNP
Shure 60602FT (Rohm TIS93)
Q108, Q110, Q112
Q201
Transistor, NPN
Shure 60203FT (TI TIP30A)
R162
Potentiometer, Reverse Audio Taper,
Shure 60310FT
100k
R163-R168
Potentiometer, Audio Taper, 50k
Shure 60311FT
S1
Switch, Slide, DPDT (Power)
Shure 61401FA
S301, S303-S308
Switch, Slide, 4PDT (Mic/Line)
Shure 60402FT (Alco MSS4200RG)
5302
Switch, Slide, 4PDT (Phantom)
Shure 60403FT (Alco MSS4200R)
T101
Transformer, Input
Shure 60501FT
T102-T107 Transformer,
Output
Shure
60502FT
T201 Transformer,
Power
Shure
61501FA
U101
Integrated Circuit, Op Amp (selected
Shure 86A808A (Raytheon RC4156DB)
for noise figure)
U102-U103
Integrated Circuit, Op Amp
Shure 86A808A (Raytheon RC4156DB)
U104
Integrated Circuit, Quad Comp
Shure 60604FT (Raytheon LM339)
W13
Line Cord, AC
Shure 60226FT