Shure EP4T, User Manual

Page: 7 / 12

7
ENGLISH
RACK MOUNTING THE P4T
The P4T features a
1
/
2
-rack chassis specially designed for sturdiness. This eliminates the sagging and bending found in most
1
/
2
-rack
designs. The brackets and straddle bars ensure that the units will be installed securely.
WARNING: Do not torque the screws too tightly, or the chassis may be damaged.
FRONT MOUNTING THE ANTENNA
The P4T transmitter comes equipped so the antenna can be front-mounted. Front-mounting prevents antenna cables from becoming en-
tangled and greatly minimizes RF interference from other cables. When a unit is located in a rack, antennas should be either front- or
remote-mounted.
NOTE: The PA715 antenna, which comes supplied with the P4T, cannot be remote mounted. Use a PA705 antenna for remote mounting.
SINGLE UNIT DUAL-MOUNTED UNITS
MOUNTING IN AN EQUIPMENT RACK
NOTE: Be sure to use both straddle bars when installing dual units.
1. Insert the bulkhead adapter
through either hole of the mount-
ing bracket and secure it from the
back using the supplied hardware.
2. Connect the transmitter antenna
output to the bulkhead adapter
with the supplied RF cable.
3. Install the antenna on the
bulkhead adapter.