![background image](http://html1.mh-extra.com/html/shure/axient-digital-adx1/axient-digital-adx1_user-manual_1262738016.webp)
Shure Incorporated
16/26
◦
◦
1.
2.
3.
Safe Start menu options:
RF
:
Mute
or
On
Locks
:
None
,
Pwr
,
Menu
,
All
Use the navigation buttons to make changes.
Tip:
To exit the Safe Start menu, cycle the power or momentarily remove the battery.
Note:
Previous settings for locks and RF will be retained when the transmitter is powered on in Safe Start.
Input Overload
The
OVERLOAD
message appears when the audio input experiences a high-level signal. The power LED turns red as an
additional indicator of an overload. Reduce the input signal or enable the input pad to remove the overload condition.
Tip: To enable the input pad, navigate to
Audio
>
Pad
and select
-12 dB
.
Matching Audio Levels with Mic Offset
When linking two or more transmitters to a receiver, there may be a difference in volume levels between microphones or
instruments. If this occurs, use the
Offset
function to match the audio levels and eliminate audible volume differences between
transmitters. If using a single transmitter, set
Offset
to 0 dB.
Turn on the first transmitter and perform a sound check to test the audio level. Turn off the transmitter when finished.
Turn on the second transmitter and perform a sound check to test the audio level. Repeat for any additional
transmitters.
If there is an audible difference in the sound level between the transmitters, navigate to the
Offset
menu (
Audio
>
Offset
) in the transmitter to increase or decrease the
Offset
in realtime to match the audio levels.