Shure Incorporated
13/26
◦
◦
◦
1.
2.
3.
4.
5.
Linked
: The transmitter is linked to a receiver. Select
Unlink?
to free the transmitter from the receiver link.
Unlinked
: The transmitter is not linked to a receiver
SL Test
ShowLink test tool to measure the boundaries of ShowLink coverage.
Marker
When enabled, press the enter button to drop a marker in Wireless Workbench.
Battery
Displays battery information:
Battery Life:
Runtime reported in bar display and time (hours:minutes)
Charge:
Percentage of charge capacity
Health:
Percentage of current battery health
Cycle Count:
Total of the number of charging cycles for the installed battery
Temperature:
Battery temperature reported in Celsius and Fahrenheit
Talk Sw
Press
ENTER
to add control from a talk switch. Press the button on the talk switch twice to complete the link.
Identify
When enabled,
Identify
flashes the transmitter icon in Wireless Workbench Inventory or Monitor tabs.
About
Displays the following transmitter information:
Model
: Displays the model number
Band
: Displays the tuning band of the transmitter
FW Version
: Installed firmware
HW Version
: Hardware version
Serial Num
: Serial number
Reset All
Restores all transmitter parameters to factory settings.
IR Sync
Use IR Sync to form an audio channel between the transmitter and receiver.
Note: The receiver band must match the band of the transmitter.
Select a receiver channel.
Tune the channel to an available frequency using group scan or manually turn to an open frequency.
Power on the transmitter.
Press the
SYNC
button on the receiver.
Align the IR windows between the transmitter and the receiver so that the IR LED illuminates red. When complete,
Sync Success!
appears. The transmitter and receiver are now tuned to the same frequency.