For parts or assistance, call SHUR-DRI Customer Service at
1-800-535-4950
Pressure Boosting and Sprinkling
4
SPECIFICATIONS
Power Supply Required. ...................................115 Volts
Motor Duty ...................................................Continuous
Circuit Requirement (minimum) .....................15.0 Amps
Discharge Adapter .......................................................1"
BOOSTING CITY WATER PRESSURE
Hazardous pressure.
Never run the pump
against a closed discharge. To do so can boil the water
inside the pump, causing hazardous pressure in the
pump causing the risk of explosion and possibly scald-
ing persons nearby. See Figure 1.
When using the pump as a high-pressure washer, use
only a reinforced high pressure hose or pipe for the dis-
charge line.
When using a garden hose, install adapters to the pump
suction and the discharge. The suction hose will require
two female ends. Either use a standard washing machine
supply hose or modify a short piece of standard 1" gar-
den hose as a suction line (See Figure 2).
Hazardous pressure.
Do not shut off the
hose or the sprinklers while the pump is running.
The hose or sprinkler head may explode. For safety,
add a 75 PSI pressure relief valve.
Flow and Output Pressure
Maximum
Model
0 PSI
10 PSI
20 PSI
30 PSI
40 PSI
50 PSI
PSI
SDSS5
10 gpm
8.5 gpm
8.0 gpm
7.5 gpm
7.0 gpm
6.0 gpm
80
PERFORMANCE
Hose Adapters
Figure 2 – Hose adapter installation
Water Faucet
Connect the Pump Inlet
to the Water Faucet
for use with Sprinklers.
3942 0401
Hose
Adapters
Figure 3 – Connect pump to a spigot for use with sprin-
klers. Connect with adapters supplied with pump
1117 0993
Figure 1 – Do not run pump with outlet shut off
Summary of Contents for SDSS5
Page 20: ......
