Shrinkfast 998 UL, Operating, Field Maintenance, And Parts Manual

Page: 21 / 42

SHRINK WRAPPING TIPS
•
During operation, always have the heat tool moving in a side to side motion.
The most important fact to keep in mind is that heat only softens the film. The
greatest amount of shrinking occurs as the film cools.
•
It is a common mistake to apply too much heat to one particular area of the
shrink film, thus burning a hole in the film. Keeping the heat tool continuously
moving will prevent this from occurring.
•
With a little practice, you will find that you can hold the heat tool closer to the
film and sweep faster often shrinking a pallet in less than 4 minutes.
•
It is absolutely necessary that the four corners of the bag be taut under the pallet.
If this is not done, the effectiveness of shrink palletizing is considerably
reduced.
20
17967-Shrinkfast889wPageNos:Layout 1 11/11/15 1:19 PM Page 22