Channel 9
LED color change speed: (0-9) OFF, (10-255) LED color change speed
increase
Channel 10
LED strobe: (0-9) OFF, (10-255) LED strobe increase
Channel 11
LED dimmer, (0-9) OFF, (10-255) LED brightness increase
NOTE: Manual function disabled when DMX connected.
▲
E1 Pressure error explanation
In order to protect pump, SONICBOOM will running self check program to find out whether
there are fog fluid in the fuel pipe.
1. E1 pressure error activation
When there is no fog fluid in the fuel tank, system can not reach preset pressure even turn on
for a long time. The pump will stop working, and report E1.
2. Way to clear E1 error
Fill the fog fluid tank, then restart the machine.
Press “VOLUME” to reset.
DMX Channel 1, start a firing.
▲
Upside-down installation
For upside-down installation, please remove the bottom panel of fluid tank, and installed to
the other side (top panel), the fluid tank should installed upward as below picture. For safety,
hanging installation should install safety rope.
▲
Maintenance
1. Use SHOWVEN original fog fluid for the best effect of SONICBOOM. Warranty will be void if
any other type fluid is used.
2. Don’t disassemble the machine by unauthorized person, modifications to the machine are
not allowed.
