background image

Please read this manual carefully before operating this product.

Warranty card attached in the manual, please keep it well.

 Safety Information

\ Unauthorized repair are prohibited, it may cause serious incident.
\ Make sure power supply in consistent with the rated voltage of the equipment, and the  
  socket must well grounded. Unplug and turn off the machine when not use.
\ Please keep the machine dry, not use in rain or snow. Not use the machine when it is wet  
  or there are fluid leakage from the machine.
\ Not use the machine in high temperature. 
\ Installed in well ventilated area, ensure at least 50cm space around the machine, cover of  
  the nozzle is forbidden.
\ For adult use only, keep it away from children, fire, inflammable and explosive articles.
\ If the machine fails to work, please stop operation and unplug the machine. Check fog  
  fluid bottle, water tank, fuse, power connection etc. carefully, if can’t solve the problem,  
  please contact SHOWVEN or your local SHOWVEN partner for advice. 
\ Suggest use SHOWVEN original FX-M fog fluid, other fluid may lead to clog or malfunction. 
\ In case of eye contact of fog fluid, please wash it with clean water. If fluid is swallowed  
  immediately look for medical advice.
\ Please do NOT adding any other material such as grease, pigment, gas etc to the fluid  
  bottle or water tank. 
\ The device shall not be altered and applied to other use purpose. 

Thanks for choosing SHOWVEN CREEPER AQ mini low fog generator. Please read following 
manual carefully and completely before operating this product. Operate according to 
instructions is very important for safety, and can elongate the service life of the machine.

Creeper AQ mini Low Fog

Generator

USER MANUAL

 Description 

SHOWVEN

 Creeper AQ mini Low Fog Generator USER MANUAL -1-

Summary of Contents for Creeper AQ mini











Reviews: