ShowTex Rail H100, Installation Manual

Page: 20 / 22

20
SHOWTEX INSTALLATION MANUAL RAIL H100 ROPE CONTROLLED
2: In order to create a pleated curtain you must take two grommets together and
attach them to the same swivel hook. When you ordered a flat curtain, simply
attach each grommet to a separate swivel hook.
1: Check if the (overlap) carriers are in line with the centre of the rail or stage. Then
pull the rope to open and close the system, if the (overlap) carriers end up at the
same point as they started, your system is properly installed.
Open
curtain
Close
curtain
3: Hang the curtain and do a final check-up of the rail system and curtain width,
perform the test using the same method as described in the first step of this
chapter.
4: Attach one curtain end to the return pulley using an S-hook and attach the
other end to the head pulley, also by using an S-hook. This will keep your curtain
in place.
INSTALL THE CURTAIN
BACK TO LIST