background image

2

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device have to:

-

 be 

qualified

-

 

follow  the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.

  Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

  Never remove warning or informative labels from the unit.

  Never use anything to cover the ground contact.

  Never aim the output nozzle directly at people.

  Never aim the output nozzle at open flames.

  Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.

  Never drink fog liquid.  If it is ingested, call a doctor immediately.  If fog liquid comes in contact with

skin or eyes, rinse thoroughly with water.

  Never lock smoke-filled rooms. Risk : panic among the locked persons!

  Never smoke permanently! The smoke must only be used for a short period -

  Do not insert objects into air vents.

  Do not open the device and do not modify the device.

  Do not connect this device to a dimmerpack.

  Do not switch the device on and off in short intervals, as this would reduce the device’s life.

  Do not touch the fogger output bare-handed during its operation (output becomes very hot).

  Do not shake the device. Avoid brute force when installing or operating the device.

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before filling the tank!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Summary of Contents for Z-1020

















Reviews: