17
Ordercode: 42278
White-PIX
4. Software Information
With this menu, you can check the currently installed software version.
01)
Press the
UP/DOWN
buttons until the display shows
.
02)
Press the
ENTER
button to open the menu.
03)
The display shows the current software version:
.
5. Network Settings
With this menu, you can adjust the device’s properties, such as the IP address, subnet mask and the
universes.
01)
Press the
UP/DOWN
buttons until the display shows
.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to toggle between the following 3 options:
IP address
Subnet mask
Universe
04)
Once you have chosen one of the options listed above, press the
ENTER
button to proceed to
edition mode.
05)
Press the
UP/DOWN
buttons to choose the piece of the IP address/Subnet mask/Universe which
needs to be adjusted and which is indicated by the
[
bracket.
06)
Press the
ENTER
button to confirm your choice.
07)
Press the
UP/DOWN
buttons to adjust the desired seting.
08)
Press the
ENTER
button to save changes.
6. Master/Slave Mode
With this menu, you can set the device as a slave.
01)
Press the
UP/DOWN
buttons until the display shows
.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to choose between “Yes” or “No”.
04)
Press the
ENTER
button to confirm your choice.
Summary of Contents for White-PIX V1
Page 26: ...25 Ordercode 42278 White PIX Dimensions ...
Page 27: ...26 Ordercode 42278 White PIX Notes ...
Page 28: ... 2015 Showtec ...
