8
DMX Dip Switch Setting
Set dip switch 10 to ON, this unit is in DMX Mode. Follow DMX address setting printed on the rear of the strobe
for the desired flash speed and dimmer.
A.
In DMX Mode, see the following figure for the desired Channel Setting:
Use dipswitches #1 - #9 to set the DMX address
Channel 1: Flash Speed
Channel 2: Flash Dimmer
Channel 3: Flash Duration
DMX products must have their own "address" to receive DMX signals.
Addresses on the Showtec Titan Strobe are set by flipping the appropriate DMX dip switches.
You need to know that DMX address settings are the sum of the dip switch values.
Example
Titan strobe
Address Value
DMX Dip Switches "ON"
Unit 1
17
#1, #5
Switch
Value
#1
1
#5
16 +
Total sum
17
Once address values are determined, add DMX dip switch values to obtain the appropriate address (DMX
Dip Switches "ON") for each unit. Flip appropriate DMX dip switches on each unit.
Summary of Contents for Titan Strobe 3000
Page 1: ...Titan Strobe 3000 ORDERCODE 40251 ...
Page 13: ...2007 Showtec ...
