19
Ordercode: 43551
Spectral PC 600Z IP
10. Calibration
With this menu, you can calibrate the device’s colors.
01)
While in the main menu, press the
UP/DOWN
buttons to choose CALIB. C.
02)
Press the
ENTER
button to open the menu.
03)
Insert the
password
in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN
and press the
ENTER
button to confirm.
04)
Press the
UP/DOWN
buttons to toggle between WT (white color calibration) and RGBW (RGBW
calibration).
10.1. White color calibration
With this menu you can adjust the temperature of the built-in white color presets.
01)
If you have chosen WT, press the
ENTER
button to open the menu.
02)
Press the
UP/DOWN
buttons to choose one of the 11 white color presets: WHITE-01 – WHITE-11.
03)
Once you have chosen the desired preset, press the
ENTER
button to open the submenu.
04)
Press the
ENTER
button to toggle between RED, GREEN, BLUE and WHITE.
05)
Press the
UP/DOWN
buttons to increase/decrease the intensity of the chosen color. The adjustment
range of each color is between 0-255, from OFF to FULL ON.
10.2. RGBW calibration
With this menu you can adjust the temperature of the white color by means of RGB colors.
01)
If you have chosen RGBW, press the
ENTER
button to open the menu.
02)
Press the
ENTER
button to toggle between the RED, GREEN and BLUE.
03)
Once you have chosen the desired color, press the
ENTER
button to edit.
04)
Press the
UP/DOWN
buttons to set the color intensity. The adjustment range is between 0-255, OFF to
FULL ON.
11. Software information
With this menu you can view the currently installed software version.
01)
While in the main menu, press the
UP/DOWN
buttons to choose INFO.
02)
Press the
ENTER
button to open the menu.
03)
Press the
ENTER
button again to access the submenu.
04)
You can now view the currently installed software version.
