17
Ordercode: 43551
Spectral PC 600Z IP
14)
Press the
UP/DOWN
buttons to set the duration of a scene. The adjustment range is between 0-255,
from 0 to 255 seconds.
15)
If you have chosen FADE, press the
ENTER
button to open the menu.
16)
Press the
UP/DOWN
buttons to set the fade time between particular scenes. The adjustment range is
between 0-255, from 0 to 255 seconds.
7.1. How to make your own custom program
01)
First, start with PROGRAM1 and add the desired settings in SCENE-01, then SCENE-02, etc.
02)
In this way you can add a maximum of 30 scenes.
03)
After that, you can start with PROGRAM2 and create a maximum of 30 scenes again.
04)
You can repeat these steps, until you’ve reached PROGRAM10, SCENE-30.
05)
It is possible to create 300 separate scenes.
8. Settings
With this menu you can set the device’s settings.
01)
While in the main menu, press the
UP/DOWN
buttons to choose SETTING.
02)
Press the
ENTER
button to open the menu.
03)
Insert the
password
in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN
and press the
ENTER
button to confirm.
04)
Press the
UP/DOWN
buttons to toggle between the following menus: Upload, Reset, Color, Dimmer,
DMX Error, PWM, Full_Power CCT.
8.1. Upload
With this menu, you can export current programs from the master device to the connected slave
devices.
01)
While in SETTING menu, press the
UP/DOWN
buttons to choose UPLOAD.
02)
Press the
ENTER
button to open the menu.
03)
Insert the password in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN
and press the
ENTER
button to confirm.
04)
The device will light up yellow. When the process is finished, the display will show OK.
05)
If there are any
problems with exporting
, the master and the slave devices will light up
red
.
06)
If the operation was
completed successfully
, the master and the slave devices will light up
green
.
8.2. Reset
With this menu, you can reset the custom programs.
01)
While in SETTING menu, press the
UP/DOWN
buttons to choose RESET.
02)
Press the
ENTER
button to open the menu.
03)
Insert the password in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN
and press the
ENTER
button to confirm.
04)
When the process is finished, the display will show OK. The custom programs will have been reset.
