SHOWTEC Spectral CYC2000, Product Manual

Page: 17 / 31

15
Run Mode
• Enter the RUN MODE mode to set the desired working mode:
- DMX mode is used when working with a DMX512 controller to control the Spectral.
- SLAVE mode is for using the device during a Master-Slave operation.
When the fixtures are in Auto program operation, the RUN MODE does not work.
Personality
Enter the PERSONALITY mode to select a DMX mode: TOUR, BLOCK1, BLOCK2, ARC1, AR1+D, ARC2,
AR2+D, AR2+S, HSV.
TOUR
: 13 channels
BLOCK1 : 9 channels
BLOCK2 : 15 channels
ARC1 : 3 channels
AR1+D : 4 channels
ARC2 : 5 channels
AR2+D : 6 channels
AR2+S : 7 channels
HSV : 3 channels
ID Address
Enter the ID ADDRESS mode to set the desired ID ADDRESS; range ID1 – ID66.