SHOWTEC Showdesigner 1024, Product Manual

Page: 17 / 20

15
2.12 Setup of slope channels
The channels that have been assigned to the jog wheels will automatically have a slope assigned when
the chase is running. Other channels can be set up with a slope also.
Step Description
1 Press program to enter programming mode.
2 Press SlopeSet
3 Select the desired fixture.
4 Push the channels you want to setup with slope until the LED indicators of the faders
are lit. Press Release and move the fader to release the selected channel.
5 Press SlopeSet again. Now setup is finished. The channels will have a slope when
running.
Example:
To assign a slope to channel 5 & 6 of fixture 1:
Press
Program -> SlopeSet -> Select Fixture 1 -> move the faders of CH5 & CH6 until the LED indicators are
lit. -> SlopeSet . Ok.
2.13 Delete
Step Description
1 Press Del .
2 Select the item you want to delete from: SC1 , SC2 , SC3 , Chase1 , Chase2 , Chase3 ,
Group1 , <=/SETX or SlopeSet .
3 Select the number buttons from 1--16 for deleting. ( not for <=/SETX , =>/SETY or
SlopeSet )
4 Item is deleted.
Example : Delete the chase stored in number button 2 of Chase 1.
Press Del -> Chase1 -> 2 . Ok.