11
2.4 Create a chase
There are three ways to create a chase:
A. Create the chase by adjusting the faders.
B. Create scenes first and then select the scenes into the chase.
C. Use a mix of the two ways described above.
A: Create a chase by adjusting the faders.
Step Description
1
Press
program
to enter programming mode
2
Select
chase1,
chase 2
or
chase 3
to store the chase.
3
Select a number from
1--16
as the number of the chase, If the LED indicator of the
number button is lit, there is already a chase stored in that number.
4
Select one or more fixtures.
5
move the faders to obtain the desired light effect.
6
If the LED indicator of
E/XY
is lit, the pan/tilt value can be adjusted by rotating the
jog wheels.
If the LED indicator of
E/XY
dims, the speed/slope of the scene can be adjusted by
rotating the jog wheels.
Shortly press
clear
/
exit
once to clear the fader output.
Press and hold
clear
/
exit
, to exit programming mode.
Press
release
, the move a fader to release the channel.
Press
<=/SETX
or
=>/SETY
to edit the previous or next step of the scene.
Press
Del
to delete a step.
Press
Insert
to insert a step.
7
Press
ADD
to save the light effect into the selected chase. The device will automatically
jump to the next step. Repeat step 4-7 to edit a new light effect.
8
Press
Program
to save the chase and exit the programming mode.
B: Create the scenes first and then add the scenes into a chase.
Step Description
1
Create scenes (see "Create a scene").
2
Press
program
to enter programming mode.
3
Select
Chase1
,
Chase2
or
Chase3
to store the chase.
4
Select a number from
1--16
as the number of the chase, If the LED indicator of the
number button is lit, there is already a chase stored in that number.
5
Select
SC1
,
SC2
or
SC3
by the order of the scenes' saving time.
6
If the LED indicator of the number button is on, it means there is already an existing scene
stored in the number. Select the scene you want to add in the chase. At this time
the selected scene is running as a preview, but is not added yet. The default speed is
3 seconds, which can be changed by the jog wheel is the
E/XY
LED is not lit.
7
After selecting a scene, press
ADD
to add the scene to the chase. The device will
automatically jump to the next step. Repeat step 5-7 to add a new scene.
8
Press
DEL
in order to delete a scene in the chase. Press
Insert
to insert a scene. Press
<=/SETX
or
=>/SETY
to edit the previous or next scene in the chase. If the next scene is
blank, it will not move further.
9
Press
exit
for a few seconds to exit the programming mode.
10
Press
Program
to save and exit.
Summary of Contents for Showdesigner 1024
Page 1: ...Showdesigner 1024 ORDERCODE 50720...
Page 20: ......
