SHOWTEC Shark Beam FX one, Manual

Page: 5 / 32

4
Ordercode: 45023
Shark Spot One
Operating Determinations
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
• To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
• The maximum ambient temperature t
a
= 40°C must never be exceeded.
• The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
• If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
• If the Shark is lowered from the ceiling or high joists, professional trussing systems have to be used.
• Use a clamp to mount the Shark, with the mounting bracket, to the trussing system.
• The Shark must never be fixed swinging freely in the room.
• The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
• When rigging, derigging or servicing the Shark, always make sure, that the area below the installation
site is secured and that there are not any unauthorized people around.