SHOWTEC Shark Beam FX one, Manual

Page: 17 / 32

16
Ordercode: 45023
Shark Spot One
04) The operation modes are:
 DMX: The Shark can be controlled via DMX controller.
 Auto: The Shark will run the built-in programs.
 Sound: The Shark will react to the beat of the background music.
 Slave: If set to Slave, the Shark will react the same as the master device.
05)
Press the ENTER button to confirm your choice.
4. Programs
With this menu you can run individual built-in programs.
01)
In main menu, press the UP/DOWN buttons until the display shows PROGRAMS.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to select one of the 8 built-in programs.
04)
Press the ENTER button to confirm your choice.
05) The device will now run the chosen built-in program.
5. Settings
With this menu you can set the Shark’s settings.
01)
In main menu, press the UP/DOWN buttons until the display shows SETTINGS.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to select the desired submenu. The display will show:
04)
Press the ENTER button to enter the desired submenu.
05) The submenus are:
 Pan Rev: Pan reverse. Press the UP/DOWN buttons to choose between NO/YES.
 Tilt Rev: Tilt reverse. Press the UP/DOWN buttons to choose between NO/YES.
 Display Rev: Display reverse. Press the UP/DOWN buttons to choose between NO/YES.