7
Installation
Remove all packing materials from the Plum Flower LED. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Remove all packing materials from the Plum Flower LED. Check that all foam and plastic padding is
removed.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Control Modes
There are 4 Modes:
1)
Sound-controlled
2)
Built-in Programs
3)
Master/Slave
4)
DMX512
One Plum Flower LED (
Sound control
)
1.
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2.
When the Plum Flower LED is not connected by a DMX-cable, it functions as a stand-alone device.
The Plum Flower LED will automatically change its color to the beat of the music. With the Audio
sensitivity control you can adjust its music-sensitivity.
Music Control
: All Dipswitches set to OFF
