background image

2

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-

 

be qualified

-

 

follow  the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the device.

 

Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!

 

Never remove warning or informative labels from the unit.

 

Never leave any cables lying around.

 

Do not insert objects into air vents.

 

Do not open the device and do not modify the device.

 

Do not connect this device to a dimmerpack.

 

Do not shake the device. Avoid brute force when installing or operating the device.

 

Do not switch the device on and off in short intervals, as this would reduce the system’s life.

 

Only use device indoor, avoid contact with water or other liquids.

 

Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.

 

Only operate the device after having familiarized with its functions.

 

Avoid flames and do not put close to flammable liquids or gases.

 

Always keep case closed while operating.

 

Always allow free air space of at least 50 cm around the unit for ventilation.

 

Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.

CAUTION!

Keep this device away from rain and moisture!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Summary of Contents for LED Powerbrick Set


















Reviews: