7
Controller Backside
Fig. 3
25)
DMX OUT
26)
DMX Polarity Switch
27)
USB Light
28)
Audio Input:
This jack accepts a line level audio input signal ranged from
100 mV to 1Vpp.
29)
MIDI Thru:
MIDI port for connection to a sequencer or MIDI device.
30)
MIDI Out:
MIDI port for connection to a sequencer or MIDI device.
31)
MIDI In:
MIDI port for connection to a sequencer or MIDI device.
32)
DC power DC 9-12V 800mA
33)
ON/OFF
Installation
Remove all packing materials from the
LED Commander
. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Summary of Contents for LED Commander
Page 1: ...LED Commander ORDERCODE 50717...
Page 16: ......
