Ordercode: 43715
Helios 200 COB Q4
4. Settings
With this menu you can manually adjust the device’s settings.
01)
Press the MODE button until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to toggle through the following menus:
Dimming curves
Dimmer speed
LCD Backlight
Factory Reset
DMX Clear
Synchronous DMX
4.1. Dimming curves
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose one of the 4 dimming curves: linear, square, inverted square
and S-type.
4.2. Dimmer speed
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose between Fast or Smooth.
4.3. LCD Backlight
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to select the desired LCD backlight time. The adjustment range is from
ON (display remains continuously ON) and 10/20/30/60s (the amount of time after which the display
will turn OFF, if no button is pressed).
4.4. Factory Reset
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose between Yes and No.
04)
Press the SETUP button to confirm your choice.
05)
If you have chosen Yes, the device will restore the factory settings.
4.5. DMX Fail
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose OFF or HOLD.
04)
If you have chosen OFF, the device perform a blackout (when a DMX signal error occurs).
05)
If you have chosen HOLD, the device will use the last working DMX signal from before the DMX error,
which ensures undisrupted performance.
17
