Ordercode: 43715
Helios 200 COB Q4
Backside
Fig. 02
04)
LCD d control buttons
05)
5-pin DMX signal connector IN
06)
3-pin DMX signal connector IN
07)
Pro power connector 100-240V IN
08)
Pro power connector 100-240V OUT
09)
3-pin DMX signal connector OUT
10)
5-pin DMX signal connector OUT
Installation
Remove all packing materials from the Helios 200 COB Q4. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
10
