9
Ordercode: 61000
FX Ice Jet
Installation
Remove all packing materials from the FX Ice Jet. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
In order to carry out a proper and safe installation, act according to the following steps:
Step 1
01)
Place the CO
2
bottle on a stable and even surface and secure it by means of an approved strap or
bottle clamp.
02)
Place the bottle in such a position that the valve opening does not point in the direction of the
public.
03)
Place the CO
2
bottle preferably outdoors or in a properly ventilated space with a CO
2
detection
system.
04)
The maximum temperature in the surrounding area should not exceed 30ºC!
05)
Consult your gas supplier for full instructions with regard to CO
2
gas use.
