SHOWTEC EventLITE 4/10 Q4 Set 6x Manual Download Page 32

Page: 32 / 40

Ordercode: 44061

EventLITE 4/10 Q4 Set 6x

Remote Control

Button

Function

Description

On / Off

Press to switch the light output ON/OFF.

Press to increase the value.

Down

Press to decrease the value.

Auto

Press to activate Auto mode.

Not functional

Built-in color

programs/Strobe

Press to choose the desired built-in color program and set the
strobe frequency.

Speed

Press the button to set the program speed.

Master/Slave

Press to set the device as a master or a slave.

Fade mode

Press to activate a color flow.

DMX address/channel

mode

Press to choose set the DMX starting address and the desired
channel mode.

Full mode

Press to activate Full-On light output.

Eco mode

Press to activate Economical mode (80 % efficiency) or
Normal mode (100 % efficiency).

Red

Press to activate the Red LED.

Green

Press to activate the Green LED.

Blue

Press to activate the Blue LED.

White

Press to activate the White LED.

Not functional

Summary of Contents for EventLITE 4/10 Q4 Set 6x









































Search results

Summary of Contents for EventLITE 4/10 Q4 Set 6x

Reviews:

Related manuals for EventLITE 4/10 Q4 Set 6x

Brands by name

Popular brands

SHOWTEC EventLITE 4/10 Q4 Set 6x, Manual

Search results

Summary of Contents for EventLITE 4/10 Q4 Set 6x

Reviews:

Related manuals for EventLITE 4/10 Q4 Set 6x

Brands by name

Popular brands