15
Ordercode: 44061
EventLITE 4/10 Q4 Set 6x
Multiple EventLITEs (DMX Control)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 3-pin XLR cable to connect the EventLITEs and other devices.
04)
Link the units as shown in Fig. 08. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
05)
Make sure the EventLITEs are in “slave” mode.
Multiple EventLITEs DMX Setup
Fig. 08
