SHOWTEC Dreamwave V1, Manual

Page: 17 / 32

16
Ordercode: 43166
Dreamwave
3. Slave/Reverse Slave Mode
In this menu you can set the slave or slave reverse.
01)
In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open this menu.
03) Press the UP/DOWN buttons to choose one of the 2 slave modes:
Normal slave mode
Mirror slave mode
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.
4. Master/Slave Mode
With this menu you can set the Master or Slave Mode.
01)
In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open this menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
Master Mode
Slave Mode (All slave devices will react the same as the master device)
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.
5. Show Mode
01)
In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to toggle between the auto programs:
-
Auto Program 0 - 9
04) Press the ENTER button to confirm your choice.
05) If you have chosen one of the auto programs , press the ENTER button to open the
following menu.
06) Press the UP/DOWN buttons to set the program speed. The adjustment range is between
, from slow to fast.
07) Press the ENTER button to save your settings.
6. Sound control Mode
With this menu you can set the Sound control.
01)
In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open this menu.
03) Press the UP/DOWN buttons to choose one of the 2 slave modes:
Sound control ON, the device will react to the beat of the music
Sound control OFF. If the device has been set to Off, the device will not
react to the beat of the music.
04) Press the ENTER button to confirm your choice.