SHOWTEC Dreamwave V1, Manual

Page: 16 / 32

15
Ordercode: 43166
Dreamwave
Main Menu Options
DMX address
Channel mode
Slave Mode
Master Mode
Show Mode
Sound-controlled
Sensitivity
DMX Fail
Backlight
Display inverse
Manual Mode
Temperature
Runtime Fixture
Software version
1. DMX Addressing
With this menu you can set the DMX address.
01)
In main menu, press the MENU button until the display shows .
02)
Press the ENTER button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up / Down buttons to select the required address from .
04) Once you have set the desired DMX address, press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.
2. Channel Mode
With this menu you can set the Channel Mode.
01)
In main menu, press the MENU button until the display shows .
02) Press the UP/DOWN buttons to choose one of the 2 following channel modes:
10-channel mode
34-channel mode
03)
Press the ENTER button to confirm your choice.
04) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.